Splish Splash, I was taking a bath- bathroom renovation v.1.0

If you've ever come over to our house, most likely you will need to use the bathroom at one point or another.  The main floor bathroom is incredibly tiny, so it's crazy to think that it's actually a four piece bathroom.  Let me introduce you to...Big Woody.  (insert dirty joke here.)

Who wouldn't want to sit on that lovely wooden throne, am I right? To the left of the doorway is a floor to ceiling cabinet, that we assume the previous owners installed.

(You can't get a very good picture of the cabinet, so I had to climb into the tub to get this shot.)  To the right of the doorway is the world's tiniest sink, which also appears to be built into the walls. 

And to top off all of Big Woody's decor, let's take a moment to appreciate the light pink tile with coordinating paint color:

Whoo! She is a beaut!  First things first (I'm the realest), we wanted to open up the space above the toilet and get rid of the clunky cabinet. A few jerks of the pry bar later...

So.Much.Better. We think we are going to put some open shelving above the toilet so we can still have some storage.  But, that's for another day.  Preferably when Jeff is home, and he can attend to the saw and I can keep all of my fingers intact.  

Our next item on the agenda was to tear down the other clunky cabinet to the left of the door.  Seriously, if you are over 125 pounds, don't bother using this bathroom, it is so narrow!  (Which may explain why I never used that bathroom.)  This cabinet looked to be a little more difficult to remove, so I focused on paint colors while Jeff figured out how to pull out the cabinet.  

Life got in the way for a few weeks, but the itch to start painting was getting to me. I so sweetly asked Jeff to remove the cabinet so I could paint. What we didn't know is this was going to extend our quick bathroom project into a week-long debacle.  It appears that the previous owners actually built the cabinet first before putting in the dry wall.  Once we removed the cabinet, we were left with large holes in the wall, the ceiling, and the floor.  Terrific. All I wanted to do was paint.  Now we have to make another trip to the hardware store.  

Behind the cabinet.

Our solution was instead of using drywall (drywall was too big of a challenge for us), we chose bead board instead.  We chose this because Jeff could just make one cut (**I mean, the hardware store could), shoot some nails into it, done!  That solved the problem with the wall, but we still had to figure out the ceiling.  Jeff bought a small drywall sheet and cut to fit, added some spacing around the ceiling joists and up it went to seal the giant hole where the cabinet was.

That still left us with the hole in the floor.  We had no extra tile lying around in the house, so we had to come up with Plan B.  Our initial thought was to try and find a tile similar at the store.  In a brief moment of brilliance, I noticed that our floor tile was also used as a border around the bottom of the bathroom wall. You can see it if you squint reallllly hard.

What if I just chiseled it off and reused those old tiles in the hole?  Even Jeff agreed with my idea (way to think on my feet!) and I chiseled away.

I may have left some holes in the drywall. Whoops.

I remembered from one of the many HGTV shows I've watched that you can take all of the gunk and glue off of tiles by heating them in a crockpot.  We decided to give it a go.  

Getting ready for their bath!

It totally worked!  I had to pick off some of the leftover goo, but they were still good to use!  Jeff got to work laying the tile, and we had almost enough to cover the whole area.  We had some extra subway tile lying around and we used those to make a makeshift border.  Not a perfect solution, but it doesn't bother us at all.  

 Let's do a little before and after to appreciate Big Woody's transformation:

Bye, bye Woody!

Corner cabinet before and after

We still have a few more updates we'd like to do to this bathroom (add corner shelves, wallpaper behind the toilet, shelves behind the toilet, new light above the vanity) but at least we can now walk into the bathroom. Feel free to come over and use our bathroom!

Why in the hell would you cover that up!?

*Bonus points if you caught the Nicole Curtis reference! This is part 2 of our "Drop it to the floor" hardwood floor renovation.  Now that all of the holes in the floor were patched, it was time to fill in the cracks. We used Elmer's Carpenter's Wood Filler to fill in the cracks.  To use, we just took a big blob of putty and smashed it into the crack.  Once it was filled, we smoothed it over with a putty knife.

We knew we needed a sander, but I wanted someone that would explain the process to me as if I was a 5 year old.  We chose a local equipment rental place, Button's Rent It, and they were wonderful.  On top of explaining everything to me in detail, they gave me a DVD that shows the process as well.  I didn't feel like a dumb girl trying to do a boy's job.  We had to rent a belt sander to sand the main part of the floors, and we also rented an orbital sander to sand the edges.  They tell you to wear earplugs while you sand, and I thought, "I worked alongside monster trucks and dirt bikes for 7 years, I don't need no stinkin' earplugs." Um, yes you do.  The sanders are SO LOUD!  

The Button man explained to me that there were three different grits that we should use on our floors.  The thickest one (that looked like a pebbled road!) would take off all of the varnish and stain from our floors.  Since we were charged per piece of sandpaper, he told us that we could probably go from the thickest grit paper to the finest grit of the papers to smooth out our floors.  His tips definitely worked AND saved us time and money.  We originally set out with Jeff using the belt sander, and I was using the orbital sander.  Ha! I turned on the damn thing and it nearly knocked me over!  Picture this, you have a 25 pound machine that you have to hold in both hands in a deep squat position.  Then, when you want to move to another section of floor, you have to smoothly carry this squirmy thing in a sumo-like squat.  Talk about a total body workout! Needless to say, I switched machines quite quickly.

It's a long way until we have naked floors!

Living Room done- Dining Room on deck.

After the floors were sanded, we wiped them down with a rag and mineral spirits.  This cleans up all of the extra dust before staining.

Naked Wood!  Do you notice our floor imperfection?

Staining was a debacle in itself. We have A LOT of wood in our house: around the doors, around every window, every entryway, etc.  The previous owners did a beautiful job, but the color is a sort of orange-y wood color.  Ick.

Orange-y wood. 

No way was I about to paint all of those molding white OR strip them all and stain them a darker color.  With that being said, we wanted dark floors, so we had to find a color that went with our orange wood moldings.  I took a piece of painted wood to my new besties at Sherwin-Williams and explained what we were trying to do.  They were super helpful and explained the different types of stains and which colors were in our wood family.  We ended up choosing Sherwin-Williams Wood Classics Oil Stain in Fruitwood.

After work, Jeff and I drove over to the house along with our delicious dinner of Taco Bell. (Yea, Supreme Tacos!)  We started off staining in the corners of the living room.  Be very careful on where you decide to start staining, otherwise you will be saying, "Nobody puts Baby in the corner" a la Dirty Dancing.

Nobody puts Patti in a corner!

We used lambswool pads to rub in the stain, then waited the allotted time on the can before wiping off the stain with a rag. We wanted to make sure that the new wood didn't come out a different color than the older wood, so we left the stain on the new wood just a few minutes longer.  This was by far the easiest step of the whole refinishing process.  I think we were done with both rooms in less than 2 hours.  Woo hoo- an early night!

Finally, we were to the polyurethane step! We stepped into our house the next evening (with TB again!) and got to work.  To put the poly on the floor, we used a paint roller with a long bar attachment and just rolled it on.  This is a very stinky step in the process, so make sure to have your room well-ventilated.

Mid-poly

Once the whole floor was rolled, we called it a day.  The floor needs two coats of poly, which required us to return the next day.  When polyurethane dries it leaves behind tiny bubbles on the surface.  To remedy this, we had to go over the surface of the floor with a light sanding by hand, then a wipe down with tack cloth to make sure there wasn't any dust left behind.  We rolled out another coat of poly, while singing "Roll Out" by Ludacris.  Now all we had to do was wait for it to dry!  What do you think?

Let's just take a trip down memory lane and recall what it used to look like in this room: 

Our carpet oasis.

Our new dance floor!